| Description | Thickness (mm) | Width X Length(mm) | color |
| PC Hollow sheet | 4-10 mm (Double-Wall) | 2100 x 5800 | Clear Blue Green Yellow Opal Brown Red Black Gray etc |
| 2100 x 11800 | |||
| PC solid sheet | 1.4-12mm | 2100 x 30000 | |
| 1820 x 30000 | |||
| 1560 x 30000 | |||
| PC solid sheet | 1220 x 30000 | ||
| PC embossed and corrugated sheet |
1.2mm & 1.5mm | 1260 x 50000 | |
| PC corrugated sheet | 1.0mm,1.2mm,1.5mm | 840 x 6000 |
| Item | Unit | Index Value | Test Method (ASTM) |
| Specific Gravity | g/cm3 | 1.2 | D-792 |
| Impact Strength (Izod, Nick) | J/M | 907 | D-256 |
| Tensile Yield Strength | Mpa | 69 | D-638 |
| Tensile Break Strength | 71 | ||
| Tensile Elongation, yield | % | 6.5 | |
| Tensile Elongation, break | 120 | ||
| Tensile Strength | Mpa | 86 | D-695 |
| Tehsile Modulus | 2400 | D-638 | |
| Thermal Expansion Coefficient | W/m.0C | 6.0 x 10-5 | D-696 |
| Thermal conductivity | W/m.K | 0.22 | C-177 |
| Heat Deformation Temperature | 0C | 135 | D-648 |
| (Load 1.81MPa) |
| Clear PC solid sheet thickness (mm) | 2 | 3 | 6 | 8 | 10 |
| Light transmission | 99 | 88 | 86 | 84 | 83 |
| Clear PC hollow sheet thickness (mm) | 2 | 3 | 6 | 8 | 10 |
| Light transmission | 99 | 88 | 83 | 82 | 80 |
| Item | Unit | Organic Glass | PC Sheet | PVC Sheet | Fiberglass | General Glass |
| Density | g/cm3 | 1.2 | 1.2 | 1.3-1.5 | 1.4-1.6 | 2.5 |
| Impact Strength | Bad | 250 times of ordinary glass,30 times of organic glass | Good | Good | bad | |
| Continuing Use Temp | 0C | 90 | 120 | 75 | 100 | 240 |
| Visible Light Transmission | % | 82 | 88 | 80 | 86 | 90 |
| Visible Light Transmission | After Some Years | Very Good | Very Good | Bad | Bad | Very Good |
| UV Transmission | % | 40 | 0 | 0 | 20 | 80 |
| Fire Retardancy | Flammable | Nonflammable | Flammable | Flammable | Nonflammable |
| Limit Curvature Radius of Solid PC sheet | |||||
| Thickness (mm) | 3 | 4 | 5 | 6 | 8 |
| Limit Curvature Radius (mm) | 600 | 800 | 1000 | 1200 | 1600 |
| Limit Curvature Radius of PC hollow sheet | ||||
| Thickness (mm) | 4 | 6 | 8 | 10 |
| Limit Curvature Radius (mm) | 850 | 1200 | 1650 | 2000 |
